![]() ![]() Timely carries a large raw materials inventory of Stock finishes. STOCK COLORSĬustom color matching is also available. Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive atmosphere or exterior installations. ROUGH OPENING HEIGHT: Net height + 13/16"ĭownload Classic -Cased Opening | Rough Opening imageĬLASSIC FRAME (S-Series & C-Series) – Cased Opening | Color Options ![]() Net Height – Frames manufactured to net heights ROUGH OPENING HEIGHT: Nominal Height + 1" (Net height +13/16") Top pressure clamps and bottom strap anchors provide an easy installation. Timely standard height – 3/16" over nominal. Primed Steel Left-Hand Knock down Door Frame is made from heavy-duty steel and is suited for 1-3/4 Steel or Wood Commercial fire doors. While this is not recommended, the frame can still be installed. Maximum space for adequate anchorage is 1 3/16" over net height resulting in approximately 5/16" of the frame face against the wall. Uneven floors will affect this measurement. Rough Opening height must provide clearance to level the header and interlock the jambs. (Use oval alignment slots to adjust clearance when installing) For wider rough openings, the frame must be positioned with equal clearance on both sides. Opening width maximum is 1 7/8" which allows 5/16" of the frame face against the wall. Frames can be installed with smaller opening widths but, in some cases, the framing must be relieved to provide the necessary clearance for plumbing the frame and installing the hardware. This clearance is necessary for the pocket on the strike and the projection of the hinge screws. This provides for 5/8" clearance between the jamb and the wall. Rough opening width is 1 1/4" over nominal door width. Timely carries a large raw materials inventory of Stock finishes.CLASSIC FRAME (S-Series & C-Series) – Cased Opening | Rough Openings Timely frames are available in six standard colors, 29 pre-matched colors and unlimited custom matching. Fasten the header above the strike jamb and the remainder of the header at every clip on the door side only. Create an equal gap between the door and frame. Begin with the header, using a screwdriver through the alignment slot closest to the strike jamb. Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive atmosphere or exterior installations. Close the door and framein order to align it with the frame. For example a communicating frame must have a larger minimum jamb depthĭownload Classic Frame General Information (S-Series & C-Series)ĬLASSIC FRAME (S-Series & C-Series) | Color Options Some limitations mayĪpply when looking at specific information. NOTE: The available jamb depths and door weights listed here apply to the Classic Frame in general. Timely frames are installed in walls constructed with either wood or steel stud framing but are installed after the drywall is applied and painted. ![]() Mullions are available in all jamb depths from 3 1/2" to 13".Ĭlassic Frames will accommodate either a 1 3/8" or 1 3/4" door weighing up to 500 lbs. Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive environments or exterior installations.įire ratings up to 90 minutes are available for non-glazed openings, and up to 45 minutes for glazed openings. Our Classic Frame is available in two material thicknesses, S-Series (20 gauge) and C-Series (18 gauge) prefinished steel.įinishing options include 2 standard colors, 4 premium colors, 30 pre-matched custom colors, project matched custom colors or primed for field painting. It is the ideal solution for most commercial drywall applications. The prefinished steel Classic Frame is our most popular profile. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |